// ST7789 135 x 240 display

#define USER_SETUP_ID 303

#define ST7789_DRIVER // Configure all registers

#define TFT_WIDTH  135
#define TFT_HEIGHT 240

#define CGRAM_OFFSET      // Library will add offsets required

#define TFT_RGB_ORDER TFT_BGR  // Colour order Blue-Green-Red

#define TFT_INVERSION_ON

// Generic ESP32 setup
//#define TFT_MISO 19
#define TFT_MOSI 11
#define TFT_SCLK 12
#define TFT_CS    10
#define TFT_DC    8
#define TFT_RST   9
#define TFT_BL 7


#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts

#define SMOOTH_FONT


// #define SPI_FREQUENCY  27000000
#define SPI_FREQUENCY  40000000

// #define SUPPORT_TRANSACTIONS