// This setup is for the RP2040 processor only when used with 8 bit parallel displays
// See SetupX_Template.h for all options available
#define USER_SETUP_ID 102

////////////////////////////////////////////////////////////////////////////////////////////
// Interface
////////////////////////////////////////////////////////////////////////////////////////////
#define TFT_PARALLEL_8_BIT

////////////////////////////////////////////////////////////////////////////////////////////
// Display driver type
////////////////////////////////////////////////////////////////////////////////////////////
#define ILI9341_DRIVER

////////////////////////////////////////////////////////////////////////////////////////////
// RP2040 pins used
////////////////////////////////////////////////////////////////////////////////////////////

//#define TFT_CS   -1  // Do not define, chip select control pin permanently connected to 0V

// These pins can be moved and are controlled directly by the library software
#define TFT_DC   28    // Data Command control pin
#define TFT_RST   2    // Reset pin

//#define TFT_RD   -1  // Do not define, read pin permanently connected to 3V3

// Note: All the following pins are PIO hardware configured and driven
// The pins are hard-coded at the moment and must not be changed here
// Connections MUST use the pins below
  #define TFT_WR   22

  // PIO requires these to be sequentially increasing - do not change
  #define TFT_D0    6
  #define TFT_D1    7
  #define TFT_D2    8
  #define TFT_D3    9
  #define TFT_D4   10
  #define TFT_D5   11
  #define TFT_D6   12
  #define TFT_D7   13
//*/

////////////////////////////////////////////////////////////////////////////////////////////
// Fonts to be available
////////////////////////////////////////////////////////////////////////////////////////////
#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts

#define SMOOTH_FONT

////////////////////////////////////////////////////////////////////////////////////////////